Warehouse flooring made of interlocking PVC tiles: forklifts, shelving, logistics

4.9/5 on Google: over 340 customer reviews on our Mosaik Floor - PVC Tile Expert (Lyon) listing.

For a warehouse, the standard flooring tile is a 10-mm-thick, 50 x 50 cm ULTIMA ULTRA interlocking PVC tile: designed for forklifts, pallet jacks, and heavy-duty racking (50 metric tons per square meter static load), installed over the existing concrete, section by section, without interrupting operations. Areas without machinery: ULTIMA INDUSTRY 7 mm. Large areas requiring quick installation: MOSAIK FACTORY 13 mm in 75 x 75 cm. Areas with very heavy traffic from heavily loaded forklifts: MOSAIK INTENSE 40 mm traffic tiles. Aisles and zones: colored zoning tiles interlocked into the floor. Aisles where forklifts turn on the spot: glued tiles.

Product Line Thickness and Size Warehouse use Charge Price per m²
ULTIMA ULTRA 10 mm, 50 x 50 cm forklift aisles, loading docks, shelving, continuous production 50 t/m² static load, rolling stock €38.40 to €76.80
ULTIMA INDUSTRY 7 mm, 50 x 50 cm picking, order fulfillment, warehouse, pallet jack 50 t/m² static €28 to €58
MOSAIK FACTORY 13 mm, 75 x 75 cm large areas, quick installation heavy traffic 33,60 €
MOSAIK INTENSE 40 mm tread plates heavy traffic of heavily loaded carts 40 t/m² see fact sheet
ULTIMA ZONAGE narrow slabs and strips marking of aisles, pedestrian walkways, and storage areas the same as the slabs 15 €

How a PVC-tile warehouse floor differs from a concrete one

Concrete remains the base; the PVC slab protects it and makes it replaceable. No concrete dust, less rolling noise, integrated floor markings that won’t fade, and damaged areas that can be repaired slab by slab. Installation takes place while operations continue: approximately 100 m² per day per person, with immediate use possible. Heavy-duty guide: choosing an industrial floor for heavy loads. Warehouse: industrial warehouse flooring. Markings: rules for floor markings in warehouses.

Warehouses and industrial facilities equipped by MOSAIK-FLOOR: 7 real-world projects

Surface areas, product lines, and installation options are listed on our project sheets. Each entry links to the detailed project page, complete with photos.

Construction Site Activity Area and Range Installation and Stress
Poyet Motte, Cours-la-Ville (69), July 2022 warehouse and factory workshops 2,000 m², ULTIMA ULTRA 10 mm PURE in dark gray and yellow Glued down in the Fenwick aisles, clipped in place elsewhere, partial leveling, 4 installers, 1 week
GERAL, Belley (01), for several years now production and storage surfaces ranging from 500 to 700 m², ULTIMA INDUSTRY PURE dark gray Adhesive for Fenwick pallet jacks; installed in the evenings and on weekends, with no downtime
Copadex, Loiret (45), March 2022 storage aisles 250 m², ULTIMA INDUSTRY 7 mm PURE dark gray clipped onto damaged concrete, forklifts, 3 installers, 1 day
Hiolle Technologies, Nord (59), July 2026 machining shop 920 m², MOSAIK INTENSE 40 mm tiles Installed by the customer on existing concrete, Fenwick forklifts and heavily loaded pallet jacks
EXOTEC, Nord (59), February 2022 assembly line 600 m², ULTIMA INDUSTRY 7 mm PURE light gray + yellow markings clipped onto lift tables, carts, and pallet jacks
DAHER, Hautes-Pyrénées (65), March 2022 aircraft production hangar 500 m², ULTIMA INDUSTRY PURE dark gray + red zoning on top of the old tile, without leveling, 4 installers, 2 days
SDIS 95, Val-d'Oise (95), December 2023 delivery of emergency vehicles 300 m², ULTIMA ULTRA 10 mm PURE dark gray + yellow markings shot blasting, surface leveling, and bonding for vehicles weighing 15 to 20 metric tons and more

All of our industrial projects: industrial flooring projects. Detailed description: warehouse flooring at a fire station.

Which floor tile for each area of the warehouse?

  • Forklift aisles: ULTIMA ULTRA 10 mm, installed where forklifts turn in place (Poyet Motte).
  • Storage areas and rack legs: ULTIMA ULTRA or INDUSTRY, 50 metric tons per square meter static load capacity, load-distribution plate under legs subject to heavy loads.
  • Picking, order fulfillment, stock: ULTIMA INDUSTRY 7 mm, clip-on.
  • Production line with floor-mounted equipment: slabs cut around the machines, which remain anchored in the concrete (EXOTEC).
  • Very heavy traffic on worn concrete: 40-mm MOSAIK INTENSE slabs (Hiolle Technologies).
  • Pedestrian walkways, danger zones, designated areas: colored ULTIMA ZONAGE pavers (red zoning at DAHER, yellow at EXOTEC and at SDIS 95).

Renovating Without Interrupting Operations: Three Ways to Phase the Work

  • In one day, within a limited area: 250 m² of walkways at Copadex, with three installers.
  • In one week on an entire site: 2,000 m² at Poyet Motte, with four installers.
  • In successive sections, in the evenings and on weekends: GERAL treats its grounds in sections ranging from 500 to 700 m² without ever stopping work.

Warehouse, factory, or workshop: Which page should I check?

Factories, production halls, ESD zones: industrial flooring. Mechanical or maintenance workshops: PVC workshop tiles. Garages: PVC garage tiles. Comparison of options: PVC tiles, resin, concrete, or ceramic tile. Budget: cost of industrial flooring per square meter. Choosing the right tiles: 2026 comparison of industrial PVC tiles.

Frequently Asked Questions About PVC Tile Warehouse Flooring

Which PVC flooring is best for a warehouse with forklifts?

ULTIMA ULTRA 10 mm, 50 x 50 cm: the thickest tile in the line, designed for warehouses with forklifts, continuous production facilities, logistics centers, and loading docks. Static load capacity of up to 50 metric tons per square meter under racking. For areas without heavy equipment (picking, warehouse offices, storage areas), ULTIMA INDUSTRY 7 mm is sufficient.

Can PVC flooring support shelving and pallets?

Yes: 50 metric tons per square meter under static load. For a heavily loaded rack base, a load-distribution plate limits punching, as with any flexible floor. Pallets and pallet jacks can move about normally; a damaged slab can be replaced individually without dismantling the adjacent racking.

Should the tiles be glued down in a warehouse?

In most cases, the flooring is installed using a clip-lock system, as with Copadex. Adhesive installation is required in areas where a center-wheel cart pivots in place (lateral shear), on platforms exposed to sunlight and at temperatures above 30 °C, and for the ECO CLASSIC grade at temperatures above 25 to 26 °C. At Poyet Motte, only Fenwick aisles are glued. UZIN KR 430 two-component adhesive; 5–7 mm expansion gap around the perimeter and a contraction joint every 8–10 m on large cold-laid surfaces.

Can the slabs be installed without interrupting logistics operations?

Yes: no wet work or drying time required; installation is done zone by zone at a rate of about 100 m² per day per person, with immediate use possible. GERAL, in Belley, has its floors installed in the evenings and on weekends in batches of 500 to 700 m², without ever interrupting its operations.

How long does it take to build a 1,000 m² warehouse?

Allow about 100 m² per day per person. Real-world examples: 250 m² in one day with three installers at Copadex; 2,000 m² in one week with four installers at Poyet Motte, including partial leveling.

PVC tiles or flooring panels for a high-traffic warehouse?

The 10-mm ULTIMA ULTRA slab is suitable for most warehouses with forklifts. For very heavy traffic from heavily loaded forklifts on worn concrete, the 40-mm MOSAIK INTENSE traffic plates distribute the load: this is the solution chosen by Hiolle Technologies for its 920-square-meter machining shop.

How do you mark aisles, storage areas, and pedestrian walkways?

With narrow ULTIMA ZONAGE tiles and colored PVC strips that clip into the floor: the markings won’t wear away under the wheels and can be repositioned if the layout changes. Guide: Regulations and Safety for Industrial Floors.

What kind of flooring is best for a cold storage facility, a damp facility, or a dusty facility?

PVC is rot-resistant and complies with EN ISO 846 (resistance to microorganisms); the Air-Flow microchannels on the underside allow air to circulate between the tile and the concrete. Checkered or embossed finish on wet areas. For spaces where the temperature remains below freezing or consistently exceeds 30 °C, request a quote: the bonding method and PVC quality are determined on a case-by-case basis.

PVC tiles, quartz-reinforced concrete, or resin: Which is best for a warehouse?

Quartz-coated concrete and resin are used for new or refinished floors, involving surface preparation and curing. Interlocking PVC tiles can be installed over existing concrete—even if it is worn—without interrupting operations, and can be removed or moved along with the shelving. Comparison: interlocking PVC tiles vs. concrete; industry statistics: industrial flooring in France.

How much does a PVC-tile warehouse floor cost?

ULTIMA ULTRA 10 mm: €38.40 to €76.80 per square meter, depending on the quality of the PVC. ULTIMA INDUSTRY 7 mm: €28 to €58 per m². MOSAIK FACTORY 13 mm in 75 x 75 cm: €33.60 per m². Edging and corner pieces sold separately; quote provided within 24 hours.

Information taken from the ULTIMA product sheets and our project sheets, updated on October 26, 2026. Quote within 24 hours.

  • 24/7 CUSTOMER SERVICE

    If you have any questions about our products or your order, please do not hesitate to contact us. Please do not hesitate to contact us.

  • SECURE PAYMENTS

    Our online payments are 100% secure. Payment by Visa, Mastercard or Paypal in 1 or 4 free instalments.

  • FAST DELIVERY

    We deliver anywhere in Europe and our lead times are 2 to 3 weeks. We take great care to meet these deadlines.

  • CONTACT US

    Our team speaks French and English. To make it easier for us to communicate with you, please send an e-mail to: contact@mosaik-floor.fr