Price per square meter of PVC tile industrial flooring in 2026

Industrial flooring made of interlocking PVC tiles costs between €28 and €76.80 per square meter (including tax) for the material only, depending on the thickness and quality of the PVC: ULTIMA INDUSTRY 7 mm from €28 to €58, ULTIMA ULTRA 10 mm from €38.40 to €76.80, MOSAIK FACTORY 13 mm at €33.60, and conductive ESD tiles from €75 to €105. Add 5 to 10% for edging and corner pieces. Installation can be done without interrupting business operations, at a rate of approximately 100 m² per day per person. Prices taken from our product sheets on October 26, 2026, before volume discounts (for orders over 50 m²).

Price per square meter by product line and PVC quality

ECO CLASSIC and ECO PREMIUM are made of recycled PVC, while PURE is made of virgin PVC. All tiles within the same line snap together: ECO-grade tiles for storage areas and PURE-grade colored tiles for signage or reception areas can be combined on the same floor.

Sample Budgets, Supplies Only

Calculations based on the prices per square meter listed above, before volume discounts and excluding borders.

Factors That Affect the Price of Industrial Flooring

• Thickness: 7 mm for the workshop and production areas, 10 mm where forklifts operate, and 13 mm for areas where trucks and Fenwick vehicles travel.
• PVC quality: recycled ECO CLASSIC, recycled ECO PREMIUM, or virgin PURE, with a wider range of colors available in PURE.
• Adhesive installation: required in extreme heat, in direct sunlight, for the ECO CLASSIC grade when temperatures exceed 25–26 °C, and under carts that swivel in place or heavy trucks; this method requires the use of UZIN KR 430 two-component adhesive and allows for additional installation time.
• Condition of the substrate: Most concrete surfaces can be coated as-is; concrete contaminated with hydrocarbons requires shot blasting and leveling, as was done at SDIS 95.
• Finishing touches: edge trim along the perimeter and at the corners, with “ULTIMA ZONAGE” markings.
• Floor area: volume allowance exceeding 50 m².

Cost of installation and business interruption

Installation is done without adhesive, at a rate of about 100 m² per day per person, with no drying time: the floor is ready for use as soon as the last tile is locked into place. Real-world examples: 250 m² in one day by three installers at Copadex; 2,000 m² in one week by four installers at Poyet Motte; 600 m² of supermarket floor space in four days without closing the store at Lilly Market. Resin or new concrete adds the cost of several days—or even weeks—of downtime to the price per square meter; see the full comparison: PVC flooring, resin, concrete, or tile.

Delivery

Flat-rate shipping of €90; free shipping on orders over €1,500 (including tax) anywhere in France and Europe, typically within 1 to 2 weeks depending on the model. You can order a sample online before getting a quote for a large project.

Pages by Use

Industrial flooring, PVC workshop tiles, warehouse flooring, comparison of industrial PVC tiles, industrial construction sites.

Frequently Asked Questions About the Cost of Industrial Flooring

What is the price per square meter for industrial flooring made of PVC tiles?

From €28 to €76.80 (including tax) per square meter, depending on the line and quality: ULTIMA INDUSTRY 7 mm from €28 to €58, ULTIMA ULTRA 10 mm from €38.40 to €76.80, MOSAIK FACTORY 13 mm at €33.60. Conductive ESD tiles cost from €75 to €105 per square meter. Edging and corner pieces are additional, accounting for 5 to 10% of the budget.

How much does a 1,000 m² warehouse floor cost?

ULTIMA ULTRA 10 mm ECO CLASSIC, designed for forklifts: €38,400 to €43,200 (including tax) for materials, before volume discount, excluding curbs. MOSAIK FACTORY 13 mm: €33,600. Installation: approximately 10 person-days, with no operational downtime.

Is a PVC tile less expensive than resin for an industrial floor?

The price of a resin depends on the contractor’s estimate, which includes concrete preparation and labor; in addition, there is downtime while the resin dries. PVC flooring is installed over existing concrete, section by section, without requiring downtime, and can be repaired on a per-section basis, which reduces costs over time.

Should I set aside a budget for soil preparation?

Rarely: The slabs are installed directly on worn, cracked concrete or old tile flooring, without a leveling layer, as at DAHER or EDF Hydro Est. Concrete that is saturated with hydrocarbons or severely deteriorated requires shot blasting and leveling before installation, as at SDIS 95 or the MIDAS auto center in La Seyne-sur-Mer.

Is there a discount for large stores?

Yes, a discount applies for areas larger than 50 m². We'll send you a quote within 24 hours with the exact number of pavers, edging stones, and corner pieces.

Prices (including tax) listed on the MOSAIK-FLOOR product pages as of October 26, 2026. Quote within 24 hours.