Which PVC floor tile should you choose for a garage? The short answer
For a garage, the recommended flooring tile is a 7-mm-thick, 50 x 50 cm interlocking PVC tile (ULTIMA INDUSTRY): it can withstand up to 50 metric tons per square meter, is installed without adhesive on concrete or existing tile flooring, and each tile can be replaced individually. Three scenarios call for different solutions: a residential garage where a seamless appearance is a priority (ULTIMA JOINTS INVISIBLES, 6.7 mm, perfectly level surface, vehicles up to 2 metric tons); a workshop or warehouse where a forklift operates (ULTIMA ULTRA, 10 mm); a damp garage, a paddock, or an outdoor floor (MOSAIK-AERO perforated slab, 18 mm, allowing air and water to circulate underneath).
| Product Line | Thickness | Format | Recommended Use | Charge |
|---|---|---|---|---|
| ULTIMA XL | 4 mm | 63.9 x 63.9 cm | office, storage room, showroom, retail space | manual pallet jack, small cart |
| ULTIMA INVISIBLE JOINTS | 6.7 mm | 45.3 x 45.3 cm | residential garage, solid rendering, plan view | vehicles weighing up to 2 metric tons |
| ULTIMA INDUSTRY | 7 mm | 50 x 50 cm | garage, workshop, car showroom | Conventional vehicles, up to 50 metric tons per square meter |
| ULTIMA ULTRA | 10 mm | 50 x 50 cm | warehouse, logistics, manufacturing | forklift, up to 50 metric tons per square meter |
| MOSAIK-AERO | 18 mm | 39.5 x 39.5 cm | wet garage, paddock, outdoors | cars, ventilated and well-drained floor |
Prices start at €28 per square meter for ECO CLASSIC recycled PVC and €36 to €39 per square meter for ECO PREMIUM, not including edge trim (5 to 10% of the budget). Details on prices, thicknesses, and quantities to order are listed further down this page; the configurator calculates the exact quantity. Information verified on the product sheets, updated on September 27, 2026.
Our garage slab collections
-
ULTIMA GARAGE SLAB
ULTIMA GARAGE SLAB
Discover the CollectionA range of PVC tiles designed for Garage-Workshop use and for all Industrial surfaces. The versatility of PVC tiles makes them ideal for other uses, such as sports halls and stores.
-
AERO GARAGE SLAB
AERO GARAGE SLAB
Discover the CollectionOpenwork clip-on tiles are widely used in garages, workshops, showrooms and paddocks. Solid, resistant and quick to install. Highly appreciated for their incomparable aesthetics.
-
Easy installation
Just clip and go - no complicated tools required. Our intuitive system ensures quick and easy installation. In just a few simple steps, transform your space with an elegant, durable floor, without the hassle of professional installation.
-
Durability
Opt for Mosaik-Floor and its twofold promise: a durable floor that stands up to the trials and tribulations of everyday life, and an elegant design that enhances your space. Our robust, aesthetic PVC tiles are ideal for transforming your garage or workshop into a place that's as functional as it is refined.
-
Simplified maintenance
A simple sweep or mop is all it takes to restore your tiles to their former glory. Robust and undemanding, they are designed to lighten your cleaning routine, allowing you to enjoy a consistently impeccable floor with a minimum of effort.
All you need to know about Vented Garage Tiles
WHAT ARE THE ADVANTAGES OF YOUR PVC TILE SYSTEM?
- Quick, easy installation with no glue or drying time.
- No interruption to your activities.
- Easy maintenance.
- Soundproofing of around 9 dB and temperature gain of 3 degrees compared to concrete.
- Less dust.
- Easy to assemble and disassemble.
- Wide range of colors and thicknesses available.
- Concrete or linoleum effect at an economical price.
WHAT TYPES OF FLOORING ARE SUITABLE FOR YOUR PVC TILES?
Our floor tiles are suitable for all types of flooring, particularly in the automotive and motorcycle sectors. They can be laid on concrete, cement, tiles, etc.
CAN THESE TILES BE USED OUTDOORS?
No, these tiles are not designed for outdoor use. PVC expands under the effect of sunlight, and exposure is not recommended. For outdoor installation, special bonding is required. Click here to find out more.
WHAT ARE THE DIMENSIONS OF PVC TILES?
Each slab measures 50 x 50 cm. We offer different thicknesses, but for a garage, we mainly recommend the 7 mm thickness.
ARE THE TILES RESISTANT?
Yes, our PVC tiles are extremely hard-wearing. Thanks to their "butterfly" joints, they can withstand heavy traffic and loads, making them ideal for garages where vehicles are parked and tools stored.
DO YOU NEED A PROFESSIONAL TO LAY THE TILES?
No, the installation of PVC tiles is very simple and does not require the intervention of a professional. Their interlocking system makes installation quick and easy.
CAN I EASILY REPLACE A DAMAGED TILE?
Absolutely. If a slab is damaged, simply replace it, thanks to the quick and easy assembly and disassembly of our tiles.
HOW TO ORDER AND DO YOU OFFER DIFFERENT COLORS?
The tiles are sold in sets of 4. You can order the quantity you need in square meters directly on our website. You can order directly by visiting the store—just click here. We offer a wide variety of colors.
Black: RAL 9004
Dark Gray: RAL 7015
Light Gray: RAL 7045
Blue: RAL 5005
Yellow: RAL 1018
Red: RAL 3020
Green: RAL 6005
WHAT ARE THE DISADVANTAGES OF THIS TYPE OF FLOORING?
There's no such thing as an ideal floor: every flooring choice has its advantages and disadvantages. However, a durable garage interlocking floor tile requires certain characteristics.
Floor coverings made from epoxy resin or polyurethane floor resin can be good solutions, provided you use a quality service provider. In fact, these flooring solutions are much heavier in application: resin installation is complex and can only be carried out by a specialist. It's not uncommon for the floor to have to be degreased with a specific acid treatment, primed or mechanically sanded before the resin can be poured. It's no coincidence that some resins come off in patches after a few months, and sometimes even a few weeks: this is the result of poor application.
These choices of professional, industrial and commercial flooring, while offering a beautiful appearance, will only offer you a lasting solution if you opt for the high-cost, high-quality professional ranges.
On the other hand, with PVC clip-on floor tiles, you're completely independent of the quality of the original floor, and it's a durable solution that's quick and easy to install. So go ahead and discover our clip-on floor tiles today!
WHAT ARE YOUR INSTALLATION TIPS AND HOW DO I GET DELIVERED?
- Remove dust and allow tiles to acclimatize to installation temperature
- Distribute the pallet and spread the PVC tiles over the entire floor of the room before beginning installation.
- Start at the center and create your square using materials such as chalk or a laser.
- Don't force PVC tiles together; they can be fitted together using a rubber mallet; glue the corner of the tile and gently hammer the joints together.
- Allow the floor to stabilize before measuring and cutting against walls and fixed pointsLeave a gap of at least 5 mm between the floor and any fixed point
- Create a template for difficult projects or complex cuts
Delivery: Delivery is made using a truck equipped with a tailgate.
We will contact you to schedule a delivery time before the delivery.
WHICH PVC FLOORING IS BEST FOR A RESIDENTIAL GARAGE, AND WHICH ONE FOR A COMMERCIAL GARAGE?
For a residential garage where a seamless appearance is important, ULTIMA INVISIBLE JOINTS (6.7 mm, 45.3 x 45.3 cm) eliminates visible joints; it requires a perfectly level surface and is suitable for vehicles weighing up to 2 metric tons. For a residential or commercial garage with vehicles, maneuvering, and regular traffic, the recommended product is ULTIMA INDUSTRY (7 mm, 50 x 50 cm, 50 metric tons per square meter static load). As soon as a forklift is in use (commercial garage, workshop, warehouse), switch to ULTIMA ULTRA (10 mm). For more details, see our guide “4, 6, 7, or 10 mm: Which Thickness to Choose.”
CAN PVC FLOOR TILES SUPPORT A CAR LIFT?
A car lift is anchored to the concrete slab, never to a floor covering installed on top of it: PVC tiles are cut around the anchor plates, just as they are around any fixed equipment, and the rest of the garage is covered as usual. ULTIMA flooring panels can withstand up to 50 metric tons per square meter under static load; around a lift, choose ULTIMA INDUSTRY (7 mm) for a garage or ULTIMA ULTRA (10 mm) for a professional workshop. For specific applications (roller jacks, jack stands, highly concentrated loads), request a quote: we’ll respond within 24 hours.
CAN PVC FLOORING BE INSTALLED IN A DAMP GARAGE OR BASEMENT?
Yes. ULTIMA tiles are rot-resistant, and their joints are tight enough to prevent water from seeping in; any small amount of moisture that might still get through evaporates through the same path. The subfloor must be hard, clean, and dry at the time of installation. If the floor is regularly exposed to moisture (wet vehicles, washing, paddock, covered outdoor area), opt instead for the MOSAIK-AERO perforated, drainage-friendly tile (18 mm, polypropylene): air and water circulate underneath it. See our article on PVC tiles for garages with damp floors.
SHOULD PVC FLOORING BE GLUED DOWN IN A GARAGE?
No, in most cases: the tiles snap together and are installed loosely. Adhesive installation is required in three situations: direct sunlight or temperatures exceeding 30 °C; ECO CLASSIC grade (recycled PVC) at temperatures above 25 to 26 °C; and when a forklift with a small center wheel is used. In all cases, leave an expansion gap of 5 to 7 mm along the walls. See our installation instructions for details.
HOW CAN YOU PREVENT TIRE MARKS ON LIGHT-COLORED PAVERS?
Tires can leave brown marks on light-colored PVC (migration of rubber components). Two solutions: choose a dark color (black, dark gray), or order the tiles with a factory-applied polyurethane protective coating (€9 per m²), which prevents migration. For oil and hydrocarbons, the tiles are treated and can be cleaned with plenty of water: see how to clean an oil stain.
ARE PVC TILES SUITABLE FOR A MOTORCYCLE OR A HIGH-TRAFFIC GARAGE?
Yes. ULTIMA tiles are dense and can withstand traffic from cars, motorcycles, trucks, carts, and pallet jacks, with a static load capacity of up to 50 metric tons per square meter. For a commercial garage with heavy traffic (car dealership, auto repair shop, car wash), see our guide on heavy-duty applications: the thickness (7 or 10 mm), the finish (smooth, checker plate, or studded), and whether to use adhesive should be selected based on the level of traffic.
CAN YOU PARK A MOTORCYCLE ON ITS SIDE STAND ON PVC TILES?
Yes, no special precautions are needed: ULTIMA slabs are dense (static load up to 50 metric tons per square meter), and a motorcycle’s side or center stand will not cause any problems. Choose ULTIMA INDUSTRY (7 mm) for a motorcycle garage; a dark color or polyurethane coating prevents tire marks on light-colored surfaces.
CAN PVC TILES BE INSTALLED OVER A HEATED FLOOR?
Yes. ULTIMA flooring tiles are installed over a floor equipped with radiant heating using the standard click-lock installation method. Since PVC expands with heat, leave a 5- to 7-mm gap around the perimeter and opt for the ECO PREMIUM or PURE grades, which are less susceptible to expansion than ECO CLASSIC. Increase the temperature gradually after installation.
Vented Garage Tiles: the durable, aesthetic solution for your floors
Transform your garage with a durable floor that's easy to install and built to last.
Tough as nails
Vented Garage Tilesare designed to withstand the weight of vehicles, tools and heavy loads without cracking or warping. Their robust composition ensures perfect stability, even in the most demanding environments.
A clean, easy-to-maintain floor
Thanks to their smooth, waterproof surface, Vented Garage Tiles are easy to clean with water or a mild detergent. No more embedded oil or tire stains: your floor stays clean and tidy every day.
Improved comfort and insulation
Unlike untreated concrete, PVC tiles offer better thermal comfort and reduce noise pollution. You'll enjoy a pleasant, quiet floor that's warmer underfoot.
The advantages of PVC Vented Garage Tiles
Quick, glueless installation
Clip-on installation is simple, with no need for glue or special tools. The tiles can be easily dismantled and repositioned, making them ideal for moving or renovation projects.
A wide choice of colors and finishes
Whether you prefer a concrete, aluminum, carbon or non-slip finish, garage floor tiles can be adapted to suit your style and use. They can also be used to delimit work or parking areas.
A sustainable, cost-effective solution
Solid and replaceable slab by slab, PVC cladding offers excellent longevity. It's a cost-effective long-term solution for both private and professional customers.
How to choose the right garage floor tiles?
Define use and load capacity
Before choosing, determine the function of your space: car garage, workshop, storage or showroom. Each use requires its own resistance.
Choose a slab to suit your environment
Smooth tiles are ideal for a clean, aesthetic look, while textured models offer better grip in wet or high-traffic areas.
Mosaik Floor tips
Our experts will help you choose the ideal format, finish and color. Take advantage of our practical guide and ask for your personalized quote for a made-to-measure project.
How much does a PVC tile garage floor cost?
The price depends primarily on the material. The three grades in the ULTIMA line share the same dimensions, thickness, and clip-on system; what varies is the PVC composition, the uniformity of the finish, and heat resistance.
- ECO CLASSIC, €28–34 per square meter: Recycled PVC mixed with recycled electrical cables. The appearance is not uniform; small colored specks remain visible on the surface. This grade is the most susceptible to expansion: at temperatures above 25–26 °C, it must be glued down.
- ECO PREMIUM, €36–39 per square meter: High-quality recycled PVC, uniform appearance, low susceptibility to expansion. It’s the best choice for a garage.
- PURE, €42–58 per square meter: virgin PVC, consistent color from one production run to the next, the most durable option in the line, and seven colors—including red, yellow, and green—for defining different areas.
In addition to this budget, you’ll need to account for edging and corner trim, which account for about 5 to 10 percent of the total, depending on the shape of the room. A long, narrow garage has proportionally more perimeter than a square garage of the same area.
In contrast, professionally installed epoxy resin requires a surface that has been prepared, sanded, and primed, and several days of downtime before it can be driven on. The interlocking tile can be installed directly on the existing floor—even if it is damaged—and can withstand foot traffic as soon as the last tile is locked into place.
What thickness should you choose for your garage?
The thickness should be selected based on the rolling load and traffic volume, not on the surface.
- 4 mm: limited traffic, light residential use.
- 6.7 mm, invisible joints: when a seamless finish is essential, on a straight, flat surface.
- 7 mm: This is the standard thickness for a garage or workshop housing conventional vehicles. Static load capacity of up to 50 metric tons per square meter.
- 10 mm: whenever a forklift or pallet jack is in operation.
One factor is just as important as thickness: vehicles with a tight turning radius. A wheel that pivots in place cuts into the surface and pushes the slabs sideways. In this case, bonding becomes necessary regardless of the chosen thickness.
How many tiles should you order for your space?
A 50 x 50 cm tile covers 0.25 m², or four tiles per square meter. For a 20 m² garage, you'll need 80 tiles.
Allow an additional 5% for edge cuts: tiles cut to fit against walls, around posts, and around thresholds can never be reused in their entirety. For a room with many cuts—such as one with pillars or a staircase—increase this allowance to 10%.
The perimeter determines the number of edging pieces: measure the length of the open sides—the ones you walk or drive along. The sides that are against a wall do not need edging.
PVC tiles, resin, or floor paint: What Sets Them Apart
There are three options for a garage floor, and they're all in different leagues.
- Floor paint is the cheapest and quickest to apply, but it chips when tires roll over it and doesn't hold up in a space where vehicles pass through every day.
- Epoxy resin creates a seamless, durable surface, provided the substrate is sound and properly prepared. Installation is a technical process best left to a professional, and if applied incorrectly, the coating will peel off in patches after a few months.
- The interlocking PVC tile does not replace the existing floor; it is installed on top of it. This means the final result is not affected by the condition of the original concrete, and a damaged tile can be replaced individually without having to redo the entire surface.
The choice therefore depends less on price than on two factors: the condition of the existing flooring and the ability to close off the space while it dries. When it comes to tile flooring, the same logic applies: consider interlocking PVC tiles or tile flooring for a garage.