Renovated manufacturing facility with 300 m² of ULTIMA ULTRA PVC flooring

Use Cases

Industrial Workshop (89): 300 m² of resin flooring renovated in a day and a half

  • Client: Industrial Manufacturing Facility
  • Industry: Manufacturing
  • Area: 300 m²
  • Location: Yonne (89)
  • Completion date: November 2026
  • Time required: 1 .5 days, 2 installers
  • Service: Supply and installation of MOSAIK-FLOOR
  • Starting surface: Severely damaged resin floor

Constraints

  • Old, heavily damaged resin floor
  • Daily forklift traffic
  • Manufacturing workshop with machinery in place

Solution

  • ULTIMA ULTRA 10 mm Smooth PURE Tiles in Dark Gray and Light Gray
  • Clip-on installation directly onto the existing resin
  • 2 MOSAIK-FLOOR installers, 1½ days

In brief: In the Yonne department (89), an industrial manufacturing facility replaced a heavily damaged resin floor—which had been subjected to forklift traffic—with 300 m² of smooth ULTIMA ULTRA PURE tiles in dark gray and light gray. Two MOSAIK-FLOOR installers snapped the tiles into place in a day and a half, laying them directly over the old resin floor.

Renovated manufacturing facility with 300 m² of ULTIMA ULTRA PVC flooring
Heavily damaged old resin floor in a manufacturing workshop, before installation

The Initial Need

In the Yonne department (89), an industrial manufacturing facility was dealing with a heavily damaged old resin floor: the coating was flaking and peeling off in patches, with tire marks and exposed concrete. Forklifts travel across the floor every day between the machines and the storage areas. A new, durable floor was needed—one that could be installed quickly without stripping the resin or laying a new subfloor.

The Selected Solution

The smooth ULTIMA ULTRA tiles, in PURE grade, were clicked directly onto the old resin floor. Two colors delineate the areas: dark gray for walkways and storage, and light gray around the machines. The MOSAIK-FLOOR team of two installers covered this first 300 m² area in a day and a half. The new floor can withstand forklift traffic, and the workshop now has a clean, uniform appearance that is easy to maintain.

Photos from the construction site

Floor in front

Industrial workshop before renovation: resin floor chipped and worn down by forklifts
Heavily damaged old resin floor in a manufacturing workshop, before installation
Light gray and dark gray ULTIMA ULTRA tiles are currently being installed on the resin

Floor after

Industrial workshop after the installation of dark gray, smooth ULTIMA ULTRA tiles
Machine area with light gray tiles and storage aisle in dark gray
Workshop floor made of light gray and dark gray ULTIMA ULTRA tiles after installation

This Project by the Numbers

  • 300 m² of smooth 10-mm ULTIMA ULTRA PURE tiles, or approximately 1,200 50 x 50 cm tiles
  • 2 colors: dark gray and light gray
  • 1½ days of installation, 2 MOSAIK-FLOOR installers
  • Daily forklift traffic

Frequently Asked Questions About This Construction Project

Can PVC tiles be installed over a damaged resin floor?

Yes: In this workshop in the Yonne department, the ULTIMA ULTRA tiles were clipped directly onto a severely damaged resin surface, without stripping or laying a new screed.

Can PVC tiles withstand forklifts?

Yes: The 10-mm ULTIMA ULTRA slabs can withstand daily traffic from forklifts in the workshop.

How long does it take to install 300 m² of pavers?

On this job site, it took one and a half days for two MOSAIK-FLOOR installers.

Can we use the colors of the tiles to define different areas?

Yes: dark gray for walkways and storage, light gray around the machines. All ULTIMA ULTRA colors snap together.

Products Used

Do you have a similar project?

Updated on November 14, 2026.

← All Projects