Use Cases
Audiovisual studio with large-format tiles, installed in a single day
- Client: Here and Now
- Industry: Audiovisual Production
- Area: 200 m²
- Location: Rhône (69)
- Date of completion: July 2019
- Time required: 1 day (a weekend), 2 installers
- Original surface: Old resin that was peeling
Constraints
- Old, peeling resin
- An aesthetically pleasing and neutral look for a film set
- Only one day available, on the weekend
Solution
- ULTIMA XL Tiles, 63.9 x 63.9 cm, 4 mm, PURE Light Gray
- Clips are attached directly to the resin, without glue or any preparation
- 200 m² installed in one day by two installers
In short: Ici et Maintenant, an audiovisual production studio in the Rhône region, wanted a floor that would match the quality of its set without having to shut down for more than a day. In July 2019, MOSAIK-FLOOR installed 200 m² of large-format ULTIMA XL PURE light gray PVC tiles, clicked directly onto an old, flaking resin floor, in a single day over the weekend by two installers.
Photos from the construction site
This Project by the Numbers
- 200 m² of 4-mm-thick ULTIMA XL PURE light gray tiles, or approximately 490 tiles measuring 63.9 x 63.9 cm
- 1 day of installation, 2 installers, one weekend
- Direct clip-on placement on chipped resin, without preparation
Frequently Asked Questions About This Construction Project
Can PVC tiles be installed over a resin floor that is peeling?
Yes, using a click-together installation method: at Ici et Maintenant, the ULTIMA XL tiles were clicked directly onto the old, chipped resin floor, without any adhesive or surface preparation. Only an adhesive installation would require removing the resin.
How long does it take to install 200 m² of ULTIMA XL pavers?
A day with two installers: The work was completed in a single day over the weekend, since the studio was closed.
Why use a large-format tile for an audiovisual studio?
The 63.9 x 63.9 cm, 4 mm-thick ULTIMA XL tile creates a more seamless floor with fewer visible joints than a 50 x 50 cm tile, resulting in a more understated and neutral look—whether on a film set or in a reception area.
What grade of PVC should I use for a light gray color?
The PURE grade, made from new material, guarantees a uniform color across the entire surface, which is essential for a light color over 200 m².
Products Used
Do you have a similar project?
Updated on October 20, 2026.